John Deere 4210 Utility Tractors Specifications
Engine
The engine is a Yanmar 3TNE82A diesel 3-cylinder liquid-cooled with a displacement of 81.2ci / 1.3L and bore/stroke of 3.23x3.31inches / 82x 84mm. It has a gross power of 27hp / 20.1kW and a compression ratio of 18.5:1. The engine is equipped with a dry air cleaner and has a rated RPM of 2600. The starter volts are 12 and the starter power is 1.6hp / 1.2kW. The oil capacity is 4.0qts / 3.8L and the coolant capacity is 5.6qts / 5.3L.
Searching for John Deere 4210 Parts? Discover Suppliers and Request Samples Now!
Find Suppliers & Request SamplesTransmission
The transmission information is not specified in the data provided.
Brakes
The brakes are wet disc brakes and can be either two- or four-wheel drive. The tractor comes with a two-post ROPS, and a foldable ROPS is optional. The differential lock is mechanical. The tractor has power steering.
Steering
The steering is powered by a Yanmar 1.3L 3-cylinder diesel engine.
Searching for John Deere 4210 Parts? Discover Suppliers and Request Samples Now!
Find Suppliers & Request SamplesCommon Problems
Users have reported issues with the tractor's electrical system, specifically with the battery and alternator. Some users have also reported issues with the tractor's fuel system, including fuel leaks and clogged fuel filters. Additionally, some users have reported issues with the tractor's transmission, including difficulty shifting gears and slipping gears. However, these issues are not common and can often be resolved with proper maintenance and care.
What Users Like
Users appreciate the John Deere 4210's versatility and ease of use. The tractor is capable of handling a variety of tasks, from mowing to plowing, and is easy to operate even for those with limited experience. Users also appreciate the tractor's durability and reliability, as well as its comfortable ride and ergonomic design. Additionally, users like the tractor's fuel efficiency and low maintenance requirements, which help to keep operating costs low.
Techincal Specifications
Engine Detail | |
| Description | Yanmar 3TNE82A diesel 3-cylinder liquid-cooled |
| Displacement | 81.2ci / 1.3L |
| Bore/stroke | 3.23x3.31inches / 82x 84mm |
| Power (gross) | 27hp / 20.1kW |
| Air Cleaner | dry |
| Compression | 18.5:1 |
| Rated Rpm | 2600 |
| Idle Rpm | 1000-2810 |
| Starter Volts | 12 |
| Starter Power | 1.6hp / 1.2kW |
| Oil Capacity | 4.0qts / 3.8L |
| Coolant Capacity | 5.6qts / 5.3L |
Engine | |
| Description | Yanmar 1.3L 3-cyl diesel |
Mechanical | |
| Description | Two- or four-wheel drive Wet disc brakes Two-post ROPS. Foldable ROPS optional |
| Differential Lock | mechanical |
| Steering | power |
Tires | |
| Ag Front | 4.00-15 (2WD) / 7.00-14 (4WD) |
| Ag Rear | 11.2-24 |
Dimensions And Tires | |
| Wheelbase | 65inches / 165cm |
| Weight | 2375 to 2675 pounds |
| Front Tire | 4.00-15 |
| Rear Tire | 11.2-24 |
Serial Numbers | |
| 2000 | 320001 |
Capacity | |
| Fuel | 10gal / 37.9L |
| Hydraulic System | 6.3gal (gear) / 23.8L 6.8gal (hydro) / 25.7L |
| Front Axle | 4.7qts / 4.4L |
Hydraulics | |
| Type | open center |
| Capacity | 6.3gal (gear) / 23.8L 6.8gal (hydro) / 25.7L |
| Pressure | 2125psi / 146.5bar |
| Valve | 5 |
| Pump Flow | 7.0gpm / 26.5lpm |
| Total Flow | 12.3gpm / 46.6lpm |
| Steering Flow | 5.3gpm / 20.1lpm |
Tractor Hitch | |
| Rear Type | I |
| Rear Lift (at 24) | 1,700lbs / 771kg |
Electrical | |
| Ground | negative |
| Charging System | alternator |
| Charging Amps | 40/55 (optional) |
| Battery Cca | 500 |
| Battery Volts | 12 |
Power Take Off Pto | |
| Rear Pto | independent |
| Rear Rpm | 540 |
| Mid Pto | optional |
| Mid Rpm | 2100 |
Transmissions | |
| Description | 9-speed partially synchronized hydrostatic |
Serial Location | |
| Description | On right side of tractor frame above the front axle |