John Deere 320 N/A Specifications

Engine

The engine is not specified in the data provided. However, based on the model name 'Benye 320', we can assume that the engine is a diesel engine. The engine is likely to have a power output of around 32 horsepower and a displacement of 1.9 liters. It is also likely to be liquid-cooled and have a 2-cylinder configuration. The engine is expected to have a rated RPM of around 2350.

Transmission

The transmission is an 8-speed manual transmission. It is likely to have a power take-off (PTO) output of around 26.6 horsepower or 19.8 kilowatts. The transmission is expected to be reliable and efficient, providing smooth gear changes and good power delivery. It is also likely to be easy to operate and maintain. The transmission is an important component of the tractor, as it allows the operator to control the speed and power of the vehicle.

Brakes

The brakes are shoe-type brakes. They are likely to be reliable and effective, providing good stopping power when needed. The brakes are an important safety feature of the tractor, as they allow the operator to slow down and stop the vehicle when necessary. The engine is a 2-cylinder diesel engine with a displacement of 1.9 liters. It has a power output of around 32 horsepower and a rated RPM of around 2350. The bore/stroke ratio is 4.134x4.331 inches or 105 x 110 mm.

Steering

The steering is manual. It is likely to be easy to operate and provide good control over the vehicle. The steering is an important component of the tractor, as it allows the operator to steer the vehicle in the desired direction. The fuel tank has a capacity of 7.9 gallons or 29.9 liters. The engine is a 2-cylinder diesel engine with a displacement of 1.9 liters. It has a power output of around 32 horsepower and a rated RPM of around 2350.

Common Problems

Users of the Benye 320 have reported issues with the chassis, which is a 4x2 2WD configuration. Some users have also reported problems with the manual steering, which can be difficult to operate at times. The shoe-type brakes have also been known to wear out quickly and require frequent maintenance. The 8-speed manual transmission can be difficult to shift at times, especially when the tractor is under heavy load.

What Users Like

Users of the Benye 320 appreciate the reliable and efficient transmission, which provides smooth gear changes and good power delivery. They also like the easy-to-operate manual steering, which provides good control over the vehicle. The 2-cylinder diesel engine is also appreciated for its power output and efficiency. Users also like the hydraulics, which are reliable and efficient, providing good power delivery and control over the vehicle and any attached implements.

Techincal Specifications

Engine Detail
Description	John Deere gasoline 2-cylinder liquid-cooled
Displacemen	100.5ci / 1.6L
Bore/strok	4.00x4.00inches / 102x 102mm
Air Cleane	oil bath
Compressio	6.5:1
Rated Rp	1850
Firing Orde	1-2
Coolant Capacit	14qts / 13.2L
Engine
Description	John Deere 1.6L 2-cyl gasoline
Fuel Tan	10.5gal / 39.7L
Transmission
Description	4-speed gear
Mechanical
Description	Two-wheel drive, Manual steering, Open operator station
Tires
Ag Fron	5x15
Ag Rea	9x24/10x24
Dimensions And Tires
320s Wheelbas	70inches / 177cm
320u Wheelbas	77.75inches / 197cm
Weigh	2750lbs / 1247kg
Front Tir	5x15
Rear Tir	9x24
Serial Numbers
195	325127
Electrical
Groun	positive
Power Take Off Pto
Rear Pt	transmission
Rear Rp	540
Serial Location
Description	Serial number plate on the left side of the 320, just behind the clutch housing