Ford 4600 Utility Tractors Specifications
Engine
The engine is a David Brown gasoline 3-cylinder liquid-cooled with a displacement of 164.4ci / 2.7L and bore/stroke of 3.939x4.500inches / 100x 114mm. It has an oil bath air cleaner and compression ratio of 7.5:1. The engine is rated at 2200 rpm and has an operating range of 700-2200 rpm. It produces a torque of 140lb-ft / 189.8Nm at 1400 rpm and has a starter voltage of 12. The oil capacity is 6.75qts / 6.4L and the coolant capacity is 11qts / 10.4L.
Searching for David Brown 4600 Parts? Discover Suppliers and Request Samples Now!
Find Suppliers & Request SamplesTransmission
The transmission details are not specified in the provided.
Brakes
The brakes are expanding shoe type and are located on the two-wheel drive. The final drive is spur gear and the differential lock is standard on the rear. The brakes are operated manually and power-assist is optional. The engine braking system is not specified in the provided.
Steering
The steering is powered by a David Brown 2.7L 3-cylinder gasoline engine. The steering system is not specified in the provided. The steering wheel is located on the left side of the operator station.
Searching for David Brown 4600 Parts? Discover Suppliers and Request Samples Now!
Find Suppliers & Request SamplesCommon Problems
Users have reported issues with the clutch system, which tends to wear out quickly. The brakes are also reported to be weak and require frequent maintenance. The engine is known to overheat in hot weather conditions. The lack of power steering makes it difficult to maneuver the tractor in tight spaces. The operator station is open and does not provide adequate protection from the elements.
What Users Like
Users appreciate the tractor's versatility and ability to handle a variety of tasks. The front and rear tires provide good traction on different terrains. The tractor is easy to maintain and repair, with readily available parts. The compact size of the tractor makes it easy to store and transport. The tractor is also fuel-efficient, making it cost-effective to operate.
Techincal Specifications
Power | |
| Engine | 63.1hp / 47.1kW |
| Pto (claimed) | 55hp / 41.0kW |
Engine Detail | |
| Description | Ford OHV 3201 diesel 3-cylinder liquid-cooled |
| Displacement | 201ci / 3.3L |
| Bore/stroke | 4.4x4.4inches / 112x 112mm |
| Power | 63.1hp / 47.1kW |
| Compression | 16.3:1 |
| Rated Rpm | 2200 |
| Torque | 166.7lb-ft / 226.0Nm |
| Torque Rpm | 1400 |
| Starter | electric |
| Starter Volts | 12 |
| Oil Capacity | 7qts / 6.6L |
| Coolant Capacity | 11qts / 10.4L |
Engine | |
| Description | Ford 3.3L 3-cyl diesel |
| Fuel Tank | 16gal / 60.6L |
Transmission | |
| Gears | 8 forward and 2 reverse |
| Clutch | 306mm dry disc |
| Oil Capacity | 13.7qts / 13.0L |
Mechanical | |
| Chassis | 4x2 2WD |
| Differential Lock | mechanical rear |
| Steering | mechanical/hydrostatic power |
| Brakes | wet disc |
| Cab | Open operator station |
| Transmission | 8-speed |
Tires | |
| Ag Front | 6.00x16/7.50x16 |
| Ag Rear | 13x28/14x30/15x30/12x38 |
Dimensions | |
| Wheelbase | 84.5inches / 214cm |
| Length | 137.4inches / 348cm |
| Height (hood) | 57.5inches / 146cm |
| Shiping Weight | 4480lbs / 2032kg |
| Clearance (front Axle) | 19.5inches / 49cm |
| Front Tread | 52 to 80inches / 132to 203cm |
| Rear Tread | 52 to 80inches / 132to 203cm |
Dimensions And Tires | |
| Wheelbase | 84.5inches / 214cm |
| Weight | 4480lbs / 2032kg |
| Front Tire | 6.00x16 |
| Rear Tire | 13x28 |
Hydraulics | |
| Type | open center |
| Pressure | 2646psi / 182.4bar |
| Pump Flow | 8.5gpm / 32.2lpm |
Tractor Hitch | |
| Rear Type | II/I |
| Control | position and draft control |
| Rear Lift (at 24 | 2535lbs / 1149kg |
Electrical | |
| Charging System | alternator |
| Charging Amps | 27 |
| Battery Volts | 12 |
| Battery Ah | 60 |
Power Take Off Pto | |
| Rear Pto | independent |
| Rear Rpm | 540 (1.375) |
| Engine Rpm | 540@1800 |